2,Compatible with Alexa and Google home allows free voice control ;remotely control devices on your smart phone via eWelink App wherever you are.

3,Take full control of connected appliances with timers, schedules and countdown (1/5/30 mins, 1 hour, etc.) with the app; share control with family and friends for added convenience.

4,Creating your own scene to trigger ON/OFF home appliances by departure mode, home mode, temperature, humidity, or other environmental conditions.

5,The wall switch adopts premium materials, such as fire-resistant shell, phosphor bronze connects and advanced PC TEMPERED GLASS, can provide fire prevention, overload protection to protect your family.

6,Neutral wire is required in your switch boxes to operate correctly;only supports 2.4G network.

The smart relay is remotely controllable via Internet and iOS (Apple) or Android smartphone App, and you can set scheduled turning ON / OFF. Share remote control in the App with your family.

Supports momentary switch mode, closes or breaks the connected circuits after 1 sec. Ideal solution for remote control of electric gates or PC power adapters.

2 and 4 channel versions are also ideal for 2-direction engine-control because the relay supports “interlock” mode, where switching one of the circuits turns the other circuits automatically off.

Product features:

• Remote ON / OFF – Anytime, anywhere, from now on you can turn all your appliances on and off remotely.
• Relay power supply: 5V DC USB or 7V-32V DC
• No of circuits controlled: 4
• Switched gangs: voltage-free dry contact or 90-250V/10A AC or 0-30V/10A DC
• Mobil App – free iOS és Android mobil App: eWeLink
• RF remote – compatible with 433 MHz Sonoff and SmartWise RF remote controllers and RF wall switches (rolling/jump code remotes not supported)
• Sync status – Check actual relay status (turned ON or OFF) with the mobile App
• Timer – Various timer functions: single time, scheduled turn on/off, countdown/timer, loop.
• Share control – Control the device together with your family
• Scene – Turn ON / OFF a gang of devices with one tap
• Smart scene – Triggered ON/OFF by temp, hum or other environmental sensors
• Compatibility – Works perfectly with Amazon Alexa, Google Assistant, IFTTT and Google Nest

This Curtain motor is used on Curtain which hides behind drapery, make your home smart and amazing! Motorized Curtain system is Widely Used in Hotel Rooms, Residential Rooms & Event Stage.

1.Easy Installation: Compact and light weight for simple ceiling or wall installation. Smooth and Quiet Operation: Motor uses a direct drive belt that enables quiet operation.

2.No need to Program: Advanced electronics eliminate the need for manual limit setting. Automatic memory will slow down the curtains before it reach the limits, on each end to prevent noisy cut off.

3.Easy operations: Curtains can be open manually. By pulling or pushing gently, it will automatically activate motor to open or close without using remote control.

Scan the QR code or search for “eWeLink” in the app store.

WiFi energy-saving magnetic holding switch circuit breaker.

1. After power on, the indicator light is red, press the button until it turns green and flashes slowly.

2. Press and hold the button for 5 seconds until the green light changes from slow flashing too fast flashing, then open the APP (Fast Mode TOUCH) and click the mobile APP to find the device, register, and pair successfully.

Turn on 1s and then auto-off

Turn off 1s and then auto-on.

The product enables remote control of home appliances through the mobile application eWeLink, available on both Android and iOS. Supported functions include:

Remote turn on/off

Timing Schedules

Device Sharing

Group Management

Works with Amazon Echo, Echo Dot, Amazon Tap

Works with Google Home, Google Nest

Works with IFTTT

The self-lock/inching mode wireless switch has two input voltage supply specifications: 5V and 5V/32V. No matter which specification is selected, the

Feature:
1. Can be equipped with wireless host. Use Double-sided tape for installation, which makes installation easier.
2. 433MHz frequency, wireless transmission is greater than or equal to 200m in open places.
3. When two feet of the detector are soaked in water, it will flash and send an alarm message to the alarm host.
4. Excellent design, slim and fashionable. Low power consumption design can make it work for a long time.
5. Ideal for Water Leak Alarm for houses, apartments (kitchens, bathrooms), warehouses, offices, laboratories, hotel rooms, garages, etc.

Specification:
Type: Water Leak Alarm
Frequency: 433MHz
Launch Protocol: 1527
Working Voltage: DC 12V
Battery Type: 12V 23A (Not Including)
Standby Current: ≤5μA
Alarm Current: ≤10mA
Transmission Distance: ≥200m/656.2ft (In Open Area)
Working Environment Temperature: -10℃-60℃
Working Humidity: <80%
Product Size: About 7.8 X 3.7 X 2cm/3.07 X 1.46 X 0.79″ (Length X Width X Height)
Product Weight: About 38g/1.3oz

Features:
To add a 433MHz smoke sensor, please install the battery into the sensor. Make sure Sonoff bridge is
connected with home WiFi already.Then
click Add RF Remote on RF Bridge device on app, select Alarm and confirm. You’ll see a new alarm icon is
added to APP. Press and hold its
icon, you’ll hear a beep sound from the RF Bridge, the red led of RF Bridge will start fast blink, which means it
has entered into learning mode.
then please press the round button of smoke detector until you hear continuous alarm sound to transmit signal.
You’ll hear two beep sounds,
and the red led of RF Bridge will blink twice. This means the PIR sensor has learnt successfully.
Color: White
Material: ABS High Sensitivity Sensor
Powered Supply: DC 9V(6F22 Battery, not included)
Transmission Frequency: CD50 independent alarm, CD50W wireless transmission(Support)

Launch Distance: ≥200M (External aerial 500 meters)
Static Current: ≤10uA
Alarm Current: ≤40mA
Alarm Loudness: ≥85dB
Environmental Temperature: -10°C～ 60°C
Environmental Humidity: ≤95%RH
Protection area: 60 Square Meters
Installation Height: ≥6m
Smoke Sensitivity: Ⅱ Grade

This is a product version featuring not just WiFi but RF receiver chips, so that the smart relay can also be controlled by Sonoff RF remote controllers and SmartWise RF wall switches. This version also has a plastic protective case.

The WiFi smart relay needs a 7V-32V AC/DC power supply, (but not compatible with 5V DC micro USB). Any connected circuits operate independently from the relay’s power supply, the relay supports 90-250V/10A alternate current connected to COM input or manages 0-30V/10A direct current in NO or NC mode. The smart device manages volt-free dry-contact switching too.

The smart relay is remotely controllable via Internet and iOS (Apple) or Android smartphone App, and you can set scheduled turning ON / OFF. Share remote control in the App with your family.

Supports momentary switch mode, closes or breaks the connected circuits after 1 sec. Ideal solution for remote control of electric gates or PC power adapters.

It is also ideal for engine-control, because the relay supports “interlock” mode, where switching one of the circuits turns the other circuits automatically off, so you may also use it for roller shutters and other 2-way motors.

Product features:

• Remote ON / OFF – Anytime, anywhere, from now on you can turn all your appliances on and off remotely.
• Relay power supply: 7V-32V AC/DC
• No of circuits controlled: 2
• Switched gangs: voltage-free dry contact or 90-250V/10A AC or 0-30V/10A DC
• Mobil App – free iOS and Android mobile App: eWeLink
• Sync status – Check actual relay status (turned ON or OFF) with the mobile App
• Timer – Various timer functions: single time, scheduled turn on/off, countdown/timer, loop.
• Share control – Control the device together with your family
• Group control – Turn ON / OFF a group of smart devices with one tap
• Smart scene – Triggered ON/OFF by temp, hum or other environmental sensors
• Compatibility – Works perfectly with Amazon Alexa, Google Assistant, IFTTT and Google Nest