RF – AHS

SONOFF RM433R2 Remote Controller

saleh onbashi — Sat, 24 Sep 2022 06:09:20 +0000

RF remote control, compatible with Sonoff T1 light switch, Sonoff Slampher smart bulb socket, and Sonoff RF / 4CH Pro smart relays, 8 separately configurable buttons

eWelink Water Leakage Sensor RF

saleh onbashi — Fri, 23 Sep 2022 17:55:57 +0000

Water Leak Sensor Alarm WiFi, APP Remote Control, 433MHz Wireless Smart Water Detector Monitor for Home, Basement, Apartment, Kitchen, Bathroom
Description:
The water indicator sensor can be used with Sonoff RF Bridge 433, alarm system, etc. When water overflow is detected, an alert notification message will be sent to the APP immediately.

Feature:
1. Can be equipped with wireless host. Use Double-sided tape for installation, which makes installation easier.
2. 433MHz frequency, wireless transmission is greater than or equal to 200m in open places.
3. When two feet of the detector are soaked in water, it will flash and send an alarm message to the alarm host.
4. Excellent design, slim and fashionable. Low power consumption design can make it work for a long time.
5. Ideal for Water Leak Alarm for houses, apartments (kitchens, bathrooms), warehouses, offices, laboratories, hotel rooms, garages, etc.

Specification:
Type: Water Leak Alarm
Frequency: 433MHz
Launch Protocol: 1527
Working Voltage: DC 12V
Battery Type: 12V 23A (Not Including)
Standby Current: ≤5μA
Alarm Current: ≤10mA
Transmission Distance: ≥200m/656.2ft (In Open Area)
Working Environment Temperature: -10℃-60℃
Working Humidity: <80%
Product Size: About 7.8 X 3.7 X 2cm/3.07 X 1.46 X 0.79″ (Length X Width X Height)
Product Weight: About 38g/1.3oz

Smoke Detector Sensor Wireless RF

saleh onbashi — Wed, 21 Sep 2022 08:40:34 +0000

This smoke sensor can work alone to realize independent alarm at home.
To achieve remote control on the phone, smoke detector needs to work with Sonoff RF bridge( 433Mhz,
EV1527) host.

Features:
To add a 433MHz smoke sensor, please install the battery into the sensor. Make sure Sonoff bridge is
connected with home WiFi already.Then
click Add RF Remote on RF Bridge device on app, select Alarm and confirm. You’ll see a new alarm icon is
added to APP. Press and hold its
icon, you’ll hear a beep sound from the RF Bridge, the red led of RF Bridge will start fast blink, which means it
has entered into learning mode.
then please press the round button of smoke detector until you hear continuous alarm sound to transmit signal.
You’ll hear two beep sounds,
and the red led of RF Bridge will blink twice. This means the PIR sensor has learnt successfully.
Color: White
Material: ABS High Sensitivity Sensor
Powered Supply: DC 9V(6F22 Battery, not included)
Transmission Frequency: CD50 independent alarm, CD50W wireless transmission(Support)

Launch Distance: ≥200M (External aerial 500 meters)
Static Current: ≤10uA
Alarm Current: ≤40mA
Alarm Loudness: ≥85dB
Environmental Temperature: -10°C～ 60°C
Environmental Humidity: ≤95%RH
Protection area: 60 Square Meters
Installation Height: ≥6m
Smoke Sensitivity: Ⅱ Grade

SONOFF RF Bridge R2 433Mhz Smart Hub

saleh onbashi — Wed, 21 Sep 2022 07:55:15 +0000

This RF Bridge can convert most of the 433MHz RF Remotes into WiFi wireless.
By adding the RF wireless Bridge to iOS/Android App eWeLink WiFi wirelessly,
you can add up to four 1-4 buttons 433MHz Wireless RF Remotes to the RF Bridge device.
After pairing the RF Remote buttons with RF controlled devices,
you can directly control maximum 16 RF controlled devices on the App through WiFi/2/3/4G network.
It can be used for most of the 433MHz RF Remote controlled products,
like RF controlled switch, RF controlled socket, RF controlled bulb, RF controlled door opener, etc.
Even more exciting is that it will work with door magnetic sensor, human body IR sensor and more other sensors
to realize security alarm, and allowing you to DIY smart scenes.

SONOFF Basic RFR2 WiFi Smart Switch with RF

saleh onbashi — Tue, 20 Sep 2022 21:21:34 +0000

Based on the classic BASIC, SONOFF constantly extends the product category, as well as improves and optimize product performance in sequence. Ultimately, BASICR2 with ETL certification comes out.
Without changing its original smart features, BASICR2 made the upgrade and optimization mainly on its safety to provide the higher value and usage experience to our users.
SONOFF RF has been acquainted by a lot of smart home lovers. Based on it, RFR2, as a new upgrade, comes out. At this time, SONOFF redesigned RFR2 that it has enhanced performance, enhanced safety, yet on at same price.
RFR2 is a 433MHz Wi-Fi DIY smart switch with “ETL CERTIFICATION” that provides users with easy smart home control. Similarly, there are same features for them so that the upgraded RFR2 also supports users to access other smart features that the classic RFR2 supports, including APP remote control, hands-free voice control, timing schedule, smart scene, sync status, 433MHz RF control, group control and LAN control. Simply put, RFR2 has same functions and just differences in its appearance and internal performance. Let’s check the new changes for it.

SONOFF DW2 RF Wireless Door / Window Sensor

saleh onbashi — Tue, 20 Sep 2022 20:56:27 +0000

Doors and windows as the entrances and exits are the weakest points of your home. An unsecured door or window is like an obvious “WELCOME” sign, to a burglar, so door/window sensors are also known as “entry sensor”. As one of the most popular home security devices, DW2-RF wireless door/window sensor is enough smart to get you to know whether your door or window is open, and it can not only send you alert notifications, but also make you know when the entrance point is opened, making sure your home is safe.
More importantly, the sensor allows you to add a security camera or old smartphone to view who is entering your home, providing you with more details and notes about the uninvited guest. Can sync the opening and closing status of door/window to app which gives you a peace of mind when you’re not at home. History records check can be traced back to the last 3 months and this can help you look back and check the condition of your home at that time. Lights are triggered in the action. You can set the linkage in the smart scene of the ewelink app to connect the sensor and your light so that you can open or close the door to trigger the hallway light on and off. The SONOFF Bridge is required for making this linkage possible. Combines with IFTTT service, the sensor can be used to trigger more devices or routines. This “device sharing” feature is for letting more of your family know your home is secure. After sharing the sensor, all of the shared users will receive the alert about the condition when someone opens the door. The sensor is 3M adhesive installed, easy to move and remove. It can work just fine upside down and sideways, as long as the magnet is less than 5mm from the sensor, which makes no difference how the sensor is located. Its battery operated and has a low power consumption that ensures the battery life can last up 2 years.

SONOFF PIR3 Motion Sensor RF

saleh onbashi — Tue, 20 Sep 2022 20:40:53 +0000

SONOFF PIR3-RF motion sensor can detect and report motion. When used for your home security system, it can detect the movement within 8M and help identify whether a human or pet is moving around inside your house, and your mobile phone will receive an alert notification. Connect SONOFF camera and you can view who is the intruder. When incorporated into your smart lifestyle, the sensor triggers your light on or off after connecting with SONOFF RF Bridge. You can set a scene that the hallway light is turned on when you enter the door.
With the universal joint, the sensor can be flexible to rotate a full 360°horizontal angle and 90°vertical angle which allows you to adjust the sensor into an optimal angle to view everything in your home (The sensor doesn’t move on its own based on your motion). Another convenience for your home is that you can use the sensor for a position where the movement is not easy to be detected via mounting it in the universal joint, and just rotate the universal joint head to get a wonderful detecting angle. Plus, you can directly stick the sensor on the surface of objects to detect the movement. Just choose one as you like.
PIR3-RF has 2 working modes that alert and normal mode. In the alert mode, the sensor is triggered per 5s when someone enters the detection range. In the normal mode, the next alert trigger is activated if there is no motion detected within 1min after the previous detection.